Georges Renault CVIS II, Operator'S Manual

Page: 7 / 76

6159932410-02
English
7 / 76
SAFETY INSTRUCTIONS
• Friction with the outer sheath should be restricted.
• Any direct pull on the cable should be avoided.
6 - TOOL CARE AND SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel
could result in a risk of injury.
Only experienced and qualified personnel (authorised electricians) are entitled to open and have access to the inside of the
controller. To eliminate the risk of electric shock, the inside of the controller shall not be serviced until at least one minute has
elapsed after switching off the controller. It is necessary to check that the capacitors are completely discharged. Since the
temperature of the internal radiator can reach 75°C, it is important to check that this temperature cannot cause burns.
In order to eliminate the risk of electric shock and damage to components, the controller MUST be switched off prior to any tool
change. The new tool is automatically recognised as soon as the rack is switched on.
When servicing a tool, use only identical replacement parts. Use of unauthorised parts or failure to follow Maintenance
instructions may create a risk of electric shock injury.