4� Installing the heart rate monitor belt
This chapter only relates to the ONmove 710 model.
Setting up the belt
1
Sensors
2
3
Reception cone
*118.08 inches
5� Key functions
4
1
6
2
5
3
7
activities
1. top: previous choice from list, increase a value, previous page of indicators from “my indicators” display, zoom in on “my route” display.
2. bottom: next choice from list, decrease a value, next page of indicators from “my indicators” display, zoom out on “my route” display.”
3.
start/pause: enter main menu of GPS, confirm a choice, start/stop the stopwatch during a session. Unlock product (hold down) when in energy saving mode.
4. back: return to the previous menu or screen.
5.
: turn the product on or off (hold down), illuminate screen.
The side keys only work once a session is underway.
6. screen: to change display during the session.
7. lap: to take lap times manually.
6� The watch’s main menus
After setting, and then each time you switch the watch on, your GPS will display the time, date and battery level.
To access product functions more quickly, you can press OK to eliminate the "Kalenji" and "Geonaute technology" screen animations that appear
when you switch your watch on.
Energy saving mode
After 5 minutes of inactivity, the watch will automatically switch to energy saving mode, indicated by a closed padlock sign at
top right hand corner of screen.
To exit energy saving mode and access main menu, hold down the
OK
key.
Press
OK
to access the GPS menu.
The
key lets you return to the time.
4 menus are listed and can be accessed by pressing
OK
. To navigate between menus use the and keys. To enter the menu of your choice, press the
OK
key.
To display the time again, press the key.
5
