Geolux LX-80-15, User Manual

Page: 40 / 62

LX-80-15 10 Hz User Manual
36 LX-80-15 10 Hz Oceanographic Radar Sensor
Fun Register
Address
Data
Length
Data Range Details
0X03
0x001E 2 bytes 0 – 1 Radar antenna status
0 – radar is not functional
1 – radar is functional
0x0020 2 bytes Current relative level Current level measured
depending on the sensor height;
Calculated as sensor height –
current level
0x0021 2 bytes Average relative level Average level measured
depending on the sensor height;
Calculated as sensor height –
average level
0x0022 2 bytes Sensor height Sensor height above the
riverbed
0x0024 2 bytes 0
→
Operating mode
1 → Standby mode
Power management
0x0025 2 bytes 0 → SDI-12 mode
1
→
Continuous scanning
Number of FFT samples
0x0028 2 bytes 0 → Maximum peak
1 → Last peak
Peak detector type
0x0029 2 bytes Standard deviation Standard deviation of
measurement
0x002A 2 bytes 0 – 360 x-axis tilt angle, in degrees
0x002B 2 bytes 0 – 360 y-axis tilt angle, in degrees
0x002D 2 bytes 0 → All sentences are sent
1 → $WAV is not sent
2 → $ANG is not sent
3 → $WAV and $ANG are not sent
NMEA protocol flags
0x002E 2 bytes 0
→ Turned off
1 → Turned on
Force continuous calibration
0x0032 2 bytes 0 – 3600 Wave analysis length
0x0033 2 bytes 0 – device range H
1/3
in current units
0x0034 2 bytes 0 – device range H
S
in current units
0x0035 2 bytes 0 – device range H
S_M0
in current units
0x0036 2 bytes 0 – wave analysis length T
ZUC
in tenths of second
0x0037 2 bytes 0 – wave analysis length T
ZUC_SPEC
in tenths of second