Geolux LX-80-15, User Manual

Page: 45 / 62

LX-80-15 10 Hz User Manual
41 LX-80-15 10 Hz Oceanographic Radar Sensor
Name Command Response Details
Concurrent
measurement
aC!/aCC! ammm8<CR><LF> 8 values are ready within mmm
seconds
Start measurement aM1!/aMC1! ammm9<CR><LF> 9 values are ready within mmm
seconds
Concurrent
measurement
aC1!/aCC1! ammm9<CR><LF> 9 values are ready within mmm
seconds
Send data - aM1 aD0! a+f+f+f+f+f<CR><LF>
a+f+f+f+f+f<CRC><CR><LF>
+f – significant wave height H
1/3
+f – significant wave height H
S
+f – zero cross-up period T
ZUC
+f – crest period T
CREST
+f – peak wave period T
PEAK
Send data - aM1 aD1! a+f+f+f+f<CR><LF>
a+f+f+f+f<CRC><CR><LF>
+f – minimum water level L
MIN
+f – maximum water level L
MAX
+f – average water level L
MEAN
+f – median water level L
MED
Aditional data aD2! .. aD9! a0<CR><LF>
a0<CRC><CR><LF>
No values are returned for
additional data.
Start measurement aM2!/aMC2! ammm3<CR><LF> 3 values are ready within mmm
seconds
Concurrent
measurement
aC2!/aCC2! ammm3<CR><LF> 3 values are ready within mmm
seconds
Send data - aM2 aD0! a+f+f+f<CR><LF>
a+f+f+f<CRC><CR><LF>
+f – significant wave height H
S_M0
+f – zero up-crossing period
T
ZUC_SPEC
+f – crest period T
CREST_SPEC
Additional data aD1! .. aD9! a0<CR><LF>
a0<CRC><CR><LF>
No values are returned for
additional data.
Continuous
measurement
aR0! .. aR9! a<CR><LF>
a<CRC><CR><LF>
The continuous mode is not
supported
Get measurement
unit for level
aXGLUN! a+d<CR><LF> +d – measurement unit for level
0 – mm
1 – cm
2 – m
3 – in
4 – ft
Set measurement
unit for level
d! a+d<CR><LF> +d – measurement unit for level
0 – mm
1 – cm
2 – m
3 – in
4 – ft