Operator Manual
Programming
3.22
© Genmega 2011
3.3.7 SET REBOOT TIME
The G2500™ contains a feature which automatically reboots the machine at a 24 hour interval.
By default this will occur at 03:00 am. This adjustable in 1 hour increments.
3.3.8 SERIAL NUMBER
The serial number is a unique number programmed into your machine at Genmega.
It not only identifies your machine for warranty purposes, but also for remote monitoring using
RMS. The first 4 digits refer to the model type, and the last 6 is production cycle. By default this
number is programmed from the factory and we do not recommend changing it. However if you
need to clear NVRAM for any purpose this number will be deleted. If you wish to re-enter the
serial number, you’ll find it on the sticker located inside of the upper cabinet.
For G2500 machines the number will begin with the prefix TYAH
Example = TYAH001234
Keeping the serial number in the proper format will prevent problems when trying to connect for
remote management.
