Genie Z-45 XC, Service Manual

Page: 93 / 440

Part No. 52709 Genie Z-45/25 & Genie Z-45/25J 4 - 63
First Edition • Second Printing Section 4 • Scheduled Maintenance Procedures
TABLE D PROCEDURES
11 Remove the lower chassis cover to access the
lower turntable bearing bolts under the drive
chassis.
12 Check to ensure that each lower bearing
mounting bolt under the drive chassis is
torqued in sequence to 210 ft-lbs
(285 Nm).
Bolt torque sequence
D-3
Check the Free-wheel
Configuration
Proper use of the free-wheel configuration is
essential to safe machine operation. The
free-wheel configuration is used primarily for
towing. A machine configured to free-wheel without
operator knowledge may cause death or serious
injury and property damage.
Collision hazard. Select a work
site that is firm and level.
Component damage hazard. If the
machine must be towed, do not
exceed 2 mph (3.2 km/h).
Non-Steer Wheels: All Models
1 Chock the steer wheels to prevent the machine
from rolling.
2 Center a lifting jack of ample capacity
(20,000 lbs/10,000 kg) under the drive chassis
between the non-steer tires.
3 Lift the wheels off the ground and then place
jack stands under the drive chassis for support.