Genie Z-45 XC, Service Manual

Page: 39 / 440

Part No. 52709 Genie Z-45/25 & Genie Z-45/25J 4 - 9
First Edition • Second Printing Section 4 • Scheduled Maintenance Procedures
TABLE A PROCEDURES
Deutz and Perkins Models:
· Fuel tank, shutoff valve, hoses and fittings,
fuel pump, fuel filter, fuel injection pumps and
fuel injectors.
Explosion and fire hazard. If a fuel
leak is discovered, keep any
additional personnel from entering
the area and do not operate the
machine. Repair the leak
immediately.
A-7
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position,
then visually inspect the sight gauge located on
the side of the hydraulic oil tank.
Result: The hydraulic oil level should be within
the top 2 inches (5 cm) of the sight gauge.
2 Add oil as needed.
Hydraulic oil specifications
Hydraulic oil type Dexron equivalent
Tank capacity 24 gallons 90.8 liters
Hydraulic system
(including tank)
30 gallons 113.6 liters