Genie Z-22 Bi-Energy, Service And Repair Manual

Page: 36 / 123

Service and Repair Manual September 2015
Jib Boom Components
24 Z-34/22 Bi-Energy Part No. 1268515
4 Use a soft metal drift to tap the rod-end pivot
pin half way out and lower one of the leveling
links to the ground. Tap the pin the other
direction and lower the opposite leveling link.
Do not remove the pin.
5 Attach a lifting strap from an overhead crane
to the rod end of the jib boom lift cylinder.
6 Remove the pin retaining fasteners from the
jib boom lift cylinder barrel-end pivot pin. Use
a soft metal drift to remove the barrel-end
pivot pin.
7 Use a soft metal drift to remove the jib boom
lift cylinder rod-end pivot pin. Remove the jib
boom lift cylinder from the machine.
Crushing hazard. The jib boom
lift cylinder may become
unbalanced and fall when it is
removed from the machine if it is
not properly supported by the
overhead crane.