Genie Z-22 Bi-Energy, Service And Repair Manual

Page: 71 / 123

September 2015 Service and Repair Manual
Turntable Rotation Components
Part No. 1268515 Z-34/22 Bi-Energy 59
Turntable Rot ation Components
11- 1 R otation H ydr aulic M otor 11-1
Rotation Hydraulic Motor
How to R emove the Tur ntabl e R otation M otor How to Remove the Turntable
Rotation Motor
Note: When removing a hose assembly or fitting,
the O-ring (if equipped) on the fitting and/or hose
end must be replaced. All connections must be
torqued to specification during installation. Refer to
Specifications, Hydraulic Hose and Fitting Torque
Specifications.
Note: Do not allow the turntable to rotate until the
hydraulic motor is installed.
1 Tag, disconnect and plug the hydraulic hoses
from the turntable rotation motor. Cap the
fittings on the motor.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
2 Remove the turntable rotation motor mounting
bolts. Remove the motor from the machine.