Genie S-100, Service Manual

Page: 462 / 497

Part No. 62401 Genie S-100 • S-105 • S-120 • S-125 7 - 110
Section 7 • Repair Procedures First Edition • First Printing
MANIFOLDS
Traction Manifold Components,
continued
The drive manifold is mounted inside the drive chassis at the circle end of the machine.
Index Schematic
No. Description Item Function Torque
12 Diagnostic fitting ................................ TP ......... Testing
13 Shuttle valve,
3 position 3 way ................................ DL ......... Charge pressure circuit that
gets hot oil out of low presure
side of the drive pump ...................... 35-40 ft-lbs / 47-54 Nm
14 Check valve, 50 psi / 3.45 bar ........... DP ........ 2 speed/brake charge
pressure circuit ................................. 25-30 ft-lbs / 38-41 Nm
15 Relief valve, 250 psi / 17.2 bar ......... DM ........ Charge pressure circuit .................... 35-40 ft-lbs / 47-54 Nm
16 Orifice - plug,
0.030 inch / 0.762 mm ....................... DN ........ Brake release and
2 speed shift control
17 Solenoid valve, 2 position 3 way ...... DO ........ Brake control .................................... 25-30 ft-lbs / 38-41 Nm
Valve Coil Resistance
Specification
Description Specification
Solenoid valve, 2 position 3 way 12V 7.4 to 9.4

(schematic items DO)