Genie S-100, Service Manual

Page: 355 / 497

Part No. 62401 Genie S-100 • S-105 • S-120 • S-125 7 - 3
Section 7 • Repair Procedures First Edition • First Printing
DISPLAY MODULE
Screen or Menu Procedure Description
Lift
Function
Ramp
Settings
With the key switch
OFF
, press
and hold the button and turn
the key switch to the
ON
position.
Release the button and
press
.
Boom up/down ramp acceleration
Boom up/down ramp deceleration
Boom extend/retract ramp deceleration
Turntable rotate ramp acceleration
Turntable rotate ramp deceleration
Jib boom up/down ramp deceleration
Valve
Calibration
With the key switch
OFF
, press
and hold the button and turn
the key switch to the
ON
position.
Release the button and
press
.
Reset drive valve defaults
Reset boom up/down valve defaults
Reset boom extend/retract valve defaults
Reset turntable rotate valve defaults
Reset platform level valve defaults
Allow boom up/down speed calibration
Allow boom extend/retract speed
calibration
Allow turntable rotate speed calibration
Reset drive joystick defaults
Reset boom up/down joystick defaults
Reset boom extend/retract joystick
defaults
Reset turntable rotate joystick defaults
Reset steer joystick defaults
Options
With the key switch
OFF
, press
and hold the button and turn
the key switch to the
ON
position.
Release the button and
press
.
Limit boom height to 100 ft (30.5 m):
< 100’,
NO LT
Limit boom height to 80 ft (24.4 m):
< 80’,
NO LT
AC generator:
NO GN
,
W REG
,
W
/
O R
Alarm:
NO AL
,
MO AL
,
TR AL
,
DE AL
,
TD AL
Lift/drive cut outs:
NO CO
,
DCONS
,
LORDR
Boom extend cut out if boom angle >5°
Auxiliary drive enable:
YES
,
NO
Proximity kill switch OR platform overload
sensing:
NONE
,
PROX
,
PLTFS
Worklight:
YES
,
NO
Flashing beacon:
YES
,
NO
Drive lights:
YES
,
NO
Steer mode change while driving:
YES
,
NO