Genie GS-2046, Service Manual

Page: 22 / 236

3 - 2 Genie GS-2046 and GS-2646 and GS-3246 Part No. 72972
June 2003 Section 3 • Scheduled Maintenance Procedures
Maintenance Symbols Legend
The following symbols have been
used in this manual to help
communicate the intent of the
instructions. When one or more of
the symbols appears at the
beginning of a maintenance
procedure, it conveys the meaning
below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required
to perform this procedure.
Indicates that a cold motor or pump will
be required to perform this procedure.
Indicates that dealer service will be
required to perform this procedure.
Pre-delivery Preparation Report
The pre-delivery preparation report contains
checklists for each type of scheduled inspection.
Make copies of the Pre-delivery Preparation report
to use for each inspection. Store completed forms
as required.
Maintenance Schedule
There are four types of maintenance inspections
that must be performed according to a schedule—
daily, quarterly, annual, and two year. The
Scheduled Maintenance Procedures and the
Maintenance Inspection Report have been divided
into four subsections—A, B, C and D. Use the
following chart to determine which group(s) of
procedures are required to perform a scheduled
inspection.
Inspection Checklist
Daily or every 8 hours A
Quarterly or every 250 hours A + B
Annual or every 1000 hours A + B + C
Two year or every 2000 hours A + B + C + D
Maintenance Inspection Report
The maintenance inspection report contains
checklists for each type of scheduled inspection.
Make copies of the Maintenance Inspection Report
to use for each inspection. Store completed forms
for three years.
SCHEDULED MAINTENANCE PROCEDURES
800-610-4101
ActionRental.com