Genie GC-1530, Service Manual, Page: 66 / 270

January 2012 Section 4 • Repair Procedures
4 - 4 GS-30 • GS-32 • GS-46 • GS-47 Part No. 228901
PLATFORM CONTROLS
1-2
Joystick
How to Remove the Joystick
1 Push in the red Emergency Stop button to the
off position at both the ground and platform
controls.
2 Disconnect the platform controls from the
control cable at the platform.
3 Remove the fasteners securing the platform
control box to the platform control bracket.
4 Remove the fasteners securing the bottom
cover to the platform control box. Open the
control box.
5 Remove the ties securing the joystick wire
harness.
6 Carefully disconnect the joystick wire harness
from the platform controls circuit board.
Electrocution/burn hazard. Contact
with electrically charged circuits
could result in death or serious
injury. Remove all rings, watches
and other jewelry.
Component damage hazard.
Electrostatic discharge (ESD) can
damage printed circuit board
components. Maintain firm contact
with a metal part of the machine
that is grounded at all times when
handling printed circuit boards OR
use a grounded wrist strap.
7 Carefully remove the joystick fasteners.
8 Carefully remove the joystick from the platform
control box.
Torque specifications
Joystick fasteners 9 in-lbs
1 Nm
1-3
Platform Controls Alarm
How to Remove the Platform
Controls Alarm
1 Push in the red Emergency Stop button to the
off position at both the ground and platform
controls.
2 Disconnect the platform controls from the
control cable at the platform.
3 Remove the fasteners securing the platform
control box to the platform control bracket.
4 Remove the fasteners securing the bottom
cover to the platform control box. Open the
control box.
5 Disconnect the red and black wires from the
alarm.
Electrocution/burn hazard. Contact
with electrically charged circuits
could result in death or serious
injury. Remove all rings, watches
and other jewelry.
Component damage hazard.
Electrostatic discharge (ESD) can
damage printed circuit board
components. Maintain firm contact
with a metal part of the machine
that is grounded at all times when
handling printed circuit boards OR
use a grounded wrist strap.
6 Carefully remove the alarm from the platform
control box.