Genie GC-1530, Service Manual

Page: 157 / 270

Section 4 • Repair Procedures January 2012
Part No. 228901 GS-30 • GS-32 • GS-46 • GS-47 4 - 95
SCISSOR COMPONENTS
58 Attach a lifting strap from an overhead crane to
the number 4 outer arm at the battery side
(index #25).
59 Remove the retaining fasteners from the
number 4 center pivot pin (index #7) at the
battery side.
60 Place a rod through the number 4 center pivot
pin at the battery side (index #7) and twist to
remove the pin.
61 Remove the number 4 outer arm (index #25)
from the machine.
Crushing hazard. The number 4
outer arm (index #25) may
become unbalanced and fall if not
properly supported when removed
from the machine.
62 Attach a lifting strap from an overhead crane to
the number 4 inner arm (index #24). Raise the
arm to a vertical position.
63 Remove the retaining fasteners from the
number 4 pivot pin at the steer end of the
machine (index #8).
64 Use a soft metal drift to remove the number 4
pivot pin (index #8) from the steer end of the
machine. Remove the number 4 inner arm
(index #24) from the machine.
Crushing hazard. The number 4
inner arm (index #24) may
become unbalanced and fall if not
properly supported when removed
from the machine.
65 Remove the cables from links d and e.
Component damage hazard.
Cables can be damaged if they
are kinked or pinched.
66 Attach a lifting strap from an overhead crane to
the number 3 outer arm at the ground control
side (index #9).
67 Remove the retaining fasteners from the
number 3 center pivot pin (index #10) at the
ground control side.
68 Place a rod through the number 3 center pivot
pin at the ground control side (index #10) and
twist to remove the pin.
69 Remove the retaining fasteners from the
number 3 pivot pin (index #29) at the non-steer
end.
70 Use a soft metal drift to remove the number 3
pivot pin (index #29) from the non-steer end of
the machine. Remove the number 3 outer arm
at the ground control side (index #9) from the
machine.
Crushing hazard. The number 3
outer arm at the ground control
side (index #9) may become
unbalanced and fall if not properly
supported when removed from the
machine.
71 Attach a lifting strap from an overhead crane to
the number 3 outer arm at the battery side
(index #9).
72 Remove the number 3 outer arm (index #9)
from the machine.
Crushing hazard. The number 3
outer arm (index #9) may become
unbalanced and fall if not properly
supported when removed from the
machine.