September 2016
Service Manual
Repair Procedures
Part No. 38139
AWP Super Series • IWP Super Series
63
Section 4
Repair Pr ocedures
Intr oducti on
Observe and Obey:
Repair procedures shall be completed by a
person trained and qualified on the repair of
this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
Be sure that all necessary tools and parts are
available and ready for use.
Use only Genie approved replacement parts.
Read each procedure
completely and adhere
to the instructions. Attempting shortcuts may
produce hazardous conditions.
Machine Configuration:
Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
•
Machine parked on a firm, level surface
•
Key switch in the off position with the key
removed
•
The red Emergency Stop button in the off
position at both the ground and platform
controls
•
Wheels chocked
•
All external AC power supply disconnected
from the machine
•
Platform in the stowed po
sition
