Sony
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
81
EN.100.007-V4.8.C3.(1)
4
Click
Preset position >Tour
.
5
Set the
Tour option
to
On
.
6
Select the preset tour you want to configure (A, B, C, D, or E), and set the
Tour
to
On
.
7
Under
Sequence
in the drop-down list, select a previously defined preset you created in
Config Tool, and click
Add
.
8
for each preset you want to add to the sequence.
9
To change the order of the presets, select a preset under
Sequence
, and click the
Up
or
Down
button.
10
Set the
Resume time on inactivity option
to
On
, and type a value (in seconds).
NOTE
The
Resume time on inactivity
option is how much time it takes to resume a PTZ
pattern after an operator has moved the PTZ camera. If the option is set to
Off
, the PTZ
pattern must be restarted manually.
Best practice:
Set the value to 120 seconds.
11
Click
OK
.
You now can use the preset tour (sequence) as a PTZ pattern in Omnicast.
