Arecont
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
6
EN.100.007-V4.8.C3.(1)
Configure picture settings
You can configure the following picture settings in the
Specific Settings
tab of Arecont cameras
in Config Tool:
•
Sharpness.
Adjusts the image crispness.
•
Blue.
Adjusts the blue tint. This setting changes the camera's automatic white balance. Valid
value are from -64 to +64 for panoramic models, and -10 to +10 for others camera models.
NOTE
It takes a few seconds for the camera to adjust to the new setting.
•
Red.
Adjusts the red tint. This setting changes the camera's automatic white balance. Valid
value are from -64 to +64 for panoramic models, and -10 to +10 for others camera models.
NOTE
It takes a few seconds for the camera to adjust to the new setting.
Configure illumination settings
You can configure the following illumination settings in the
Specific Settings
tab of Arecont
cameras in Config Tool:
•
Illumination mode.
Adjusts the camera’s white balance settings based on the illumination
in the scene. From the drop-down list, choose one of the following options:
Auto.
The camera’s white balance is adjusted automatically.
Indoor.
Assumes the camera is located indoors with tungsten or fluorescent lighting.
Outdoor.
Assumes the camera is located outdoors with natural lighting.
Mix.
Assumes the camera is located indoors with natural lighting.
