Bosch
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
29
EN.100.007-V4.8.C3.(1)
Configure Bosch audio inputs
When you add Bosch units with firmware 5.0 and later in Omnicast, two microphone (audio
input) entities appear under the unit in the entity tree. In Omnicast, you can only associate one
microphone with a camera. Therefore, you must select which microphone to use, select the data
format, and associate the microphone to the camera.
1
In the
Physical view
of the Config Tool, select the Bosch unit.
2
Under the unit, select the microphone (audio input) you want to use.
3
Click the
Properties
tab.
4
From the
Data format
drop-down list, select
Mulaw
or
AAC
.
5
In the
Attached cameras
section, select the Bosch camera.
6
Click
Apply
.
