Arecont
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
8
EN.100.007-V4.8.C3.(1)
High Speed.
Allows you to set a fixed exposure time from the
Short Exposure
slider.
NOTE
Low values reduce motion blur, but may result in noisier video. Make sure you have
enough illumination to improve the image quality.
Speed.
Enables short exposures ranging from 10 to 80ms. The exposure time increases in
low light conditions.
Balanced.
Enables medium exposures ranging from 20 to 80ms in low light conditions,
resulting in a higher exposure time.
Quality.
Enables longer exposures ranging from 40 to 200ms. Motion blur may increase,
but video contains less noise under low light conditions.
Moon Light.
Enables exposures of up to 500 ms if necessary. This mode results in more
motion blur for fast moving objects.
•
Short Exposure.
Sets the fixed exposure time when you set the
Low light mode
to
High
Speed
.
Configure day/night settings
You can configure the following day/night settings in the
Properties
tab of Arecont unit entities
in Config Tool.
NOTE
These settings are only supported on dual-sensor cameras (for example, the AV135 and
A3130), and cameras equipped with an IR filter (DN and IR models).
•
Day/Night mode.
Determines whether the camera operates in daytime or nighttime
modes, which adjusts the amount of light.
