Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
44
Note:
When using the pipe-through function, be sure to set the correct COM2 port to Pipe Through. Furthermore, set the same UPS
with identical values on both CS141s. All other settings may differ.
When using SITEMANAGER 6 or SITEMONITOR 6:
In general, these devices support the Pipe-Through function, but the connection possibilities are limited. Both, SITEMANAGER
6 and SITEMONITOR 6 need to be installed as second device.
Attention:
In some cases, SITEMANAGER 6 and SITEMONITOR 6 may offer options to change the pre-sets of COM 2 and COM 3.
Due the pre-sets fact internal wiring to a second main board is used, changing these values will not work:
Although the CS141 may work in general, all other functions coming with the SITEMANAGER and SITEMONITOR will
not be available:
Even the SITEMANAGER 6 and SITEMNONITOR 6 will not be damaged by changing these values, the devices are not
fully operational.
Proceed to submenu UPS and click on Setup to enter the basic UPS configuration dialog.
This configuration dialog allows to choose the UPS your CS141 is installed to
– recommended values will be entered
automatically by selecting a UPS:
