Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
42
Configure TRAP receiver dealing with SNMP v3
To set up a trap receiver dealing with SNMP v3, you need to create a suitable user. This user can then be selected as the trap
recipient in SNMP v3.
Trap receiver test
The Trap receiver can be subsequently tested by pressing the test button. The corresponding test message should be displayed
directly in your management program.
UPS Setup
This configuration step requires 2 menus.
First, open the system tab Devices and click on Setup:
Depending on the design and model, the CS141 provides up to three additional COM ports fulfilling different functions. Please
note in some cases submenus will appear to specify functions of devices connected to CS141. To start configuration, go to
Devices and press Setup.
Ensure UPS is selected at COM 1
:
As a standard, COM1 the setting UPS should be selected. If not, open the drop-down
menu and select UPS.
By pressing Apply this selection will be saved and the CS141 will start required
services to communicate with the UPS:
Keep in mind by activating this function, a dummy is set first - this is necessary to allow
a general access to the corresponding submenus.
The CS141 will display the current starting phase as well as the success of the activation at the upper task bar.
