Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
21
It is possible to carry out all other settings in regular operating mode.
Exception: Initial configuration in case of DHCP mode
DHCP mode during initial configuration
While booting in DHCP mode, an according server assigns an IP address to the CS141 device. This IP address can be found
comfortable by using the freeware tool Netfinder.
Therefore, it is easy to identify the device by the MAC address shown by Netfinder and the address label glued on the CS141
device:
The function open device opens a separate web browser and inserts the IP address automatically.
After login, it is possible to access network settings and change the IP address. after rebooting the device with manual mode
setting, new IP address setting is active. By switching back to DHCP mode, these settings are completely ignored and the
CS141 falls back to server-assigned address.
The advantage is as many CS141 into the network at the same time without much effort, which are immediately accessible
without the possibility of an address conflict. The disadvantage is the fact that in DHCP mode the IP addresses can change
dynamically, which means that higher-level or docked shutdown solutions may no longer be able to access or output errors.
Advanced basic settings
For this configuration step, navigate to the following menu:
Location description
Location data can be read by software that supports this option. If you monitor many sites with multiple installations, you can
use this function to facilitate the mapping of installed devices.
Apply
will save the settings and restart according services to activate the new settings instantly. Netfinder will find the new name
next to the IP address:
