Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
99
Firmware updates
Firmware updates can be found at www.generex.de by
following the download area. These System updates are
regularly provided for the CS141. In addition to general
product enhancements such as increased stability and
improvements in operational and reliability, these
updates also regularly provide new features that
integrate seamlessly to existing configurations.
By default, the OEM ID 12 / GENEREX is preinstalled on
delivery. Deviations will result if you have purchased the Web Manager as part of a UPS from a manufacturer that comes with
OEM agreements.
Note:
Due to the fact CS141 is not technically locked, you can install the OEM version of another manufacturer at any time. In case of
another UPS is used, just install an according OEM firmware version.
Under Firmware, select the version you need to use and download it to your computer. Unpacking the file is not necessary.
After downloading, open the web interface of the CS141 and open
Update:
Drag the downloaded, packed file directly to the provided window. With Start will trigger the update process. Before triggering
the update with Start button, you can select the following additional options:
Reset to factory settings
This option deletes all configurations during the update and returns the device to the delivery state.
Reset the network to factory settings
This option also resets the network and IP settings to factory defaults.
Note:
These two options are independent to each other to ensure not losing the IP settings. Due to this fact a factory reset using a
remote access to the CS141 is possible. Please note Reset network to factory settings needs to be de-selected if CS141 has to
hold its IP settings
Since the update is interactive, please remain on the page until you are prompted to restart the device. Under system, open
about menu to check the success of the update.
