Generalmusic 271221, Owner'S Manual

Page: 74 / 224

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4•6 User Guide
You will now see a small check mark at the extreme right of the
sample name indicating that this sample has been assigned and
is now ready to be saved.
Now you can press STORE and select a destination and a name
for your new sound.
As mentioned before, you may save this sound into any availa-
ble location in the user sound families. Press ENTER to com-
plete the operation.
Assigning multiple samples
If you have loaded a number of different samples into SAMPLE
TRANSLATOR then you will need to use the ASSIGN MENU to
map your samples to specific areas of the keyboard.
Place the cursor over each sample and press the INCLUDE but-
ton, (F3). Now you will see an upper and lower note limit of A0 to
C8 for the selected sample. Place the cursor over the A0.
You can change this value either with the dial or, if you press the
MIDI button, (F2), you can change it by pressing a key on the
keyboard. Once you’ve assigned the lower note limit, move the
cursor to the upper note and assign this in the same way. This
process should be repeated for every sample in the list.