Generalmusic 271221, Owner'S Manual

Page: 47 / 224

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sound mode 1•23
SPEED: The time taken for the pitch slide to occur.
TIME/RATE: This control affects the way that the SPEED setting
is interpreted. When this parameter is set to TIME, the SPEED
value controls the actual amount of time it takes to slide from any
note to any other note regardless of the “distance” in pitch be-
tween the two. This means that the time taken to slide between
any two notes will always be the same.
When this parameter is set to RATE, the SPEED value controls
the amount of pitch change per second. This means that the
time it takes to slide from one note to another depends entirely
on the “distance” it has to travel between the two. This means
that the time taken to slide between any two notes will be differ-
ent depending on which notes were played.
AFTERTOUCH
Here you can enable or disable the aftertouch effect.
VELOCITY
You can choose from eight different velocity curves. A small graph-
ic is displayed to represent each curve. There are four normal
curves - 0, 1, 2 and 3, (where a lighter touch produces a quieter
sound), and four inverse curves - 4, 5, 6 and 7, (where a lighter
touch produces a louder sound).
This menu also allows you to set velocity limits to your sound by
using the
VELOCITY RANGE parameter.