Generalmusic 271221, Owner'S Manual

Page: 135 / 224

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sequencer 11•3
The screen will invert to a white-on-black display and we are
now in
RECORD MODE. You will notice that the TRACK #1
button is flashing and a sound is displayed in the screen which is
also playable from the keyboard. You’re ready to record track #1.
Press PLAY but don’t play anything for a moment. You will hear
the metronome, (click track), and, in the upper right corner of the
screen, you will see the song position locator which is divided
into bars, beats and ticks.
Let the metronome continue for a few measures and then press
STOP. You’ll notice that the STOP button is flashing. When you
press STOP once in this way, it functions as a pause button.
Press STOP a second time and you’ll see that the light now re-
mains constantly on. This resets the locator to the beginning of
the song.
When you press PLAY, the first four clicks you hear are a count-
down to the first measure of the song. This countdown period is
displayed by the locator as bar #0. After the countdown has fin-
ished, you can begin recording. Try to record a few measures
using the currently selected sound. When you finish recording,
press STOP twice to return to the beginning of the song.
If you made a mistake or wish to re-record the track, simply press
PLAY once more and try again. When you’re satisfied with your
recording, press the flashing TRACK #1 button to stop recording
that track.
Now you can listen to what you recorded by pressing PLAY again.
Make sure that playback starts from the beginning of the song by
pressing STOP twice.
Now let’s record another track. Pressing the TRACK #2 button
the first time will show you which sound is ready for recording in
that track. Pressing it a second time will set the button flashing
Flashing