Generalmusic 271221, Owner'S Manual

Page: 181 / 224

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User panel 12•5
BUTTON SETTINGS
FUNCTION
Here you can choose which function you want this button to have.
The choice of available functions will be different depending on
whether you set internal or external mode.
DATA 1 and DATA 2
Up to two values can be assigned to the button. These values
will have a different effect depending on the selected FUNCTION.
Here are some examples:
NOTE ON: DATA 1 sets the MIDI note number while DATA 2
sets the velocity amount.
PROGRAM CHANGE: DATA 1 sets the bank number and
DATA 2 sets the sound number.
Note that, because the DATA
1 and 2 values range from 0 to 127, there is an offset of -1
between these values and the normal sound and bank num-
bers. This means that, to select sound numbers 1, 2 and 3,
you would need to use DATA 2 values of 0, 1 and 2 respec-
tively, (the same applies to bank numbers).
PERFORM CHANGE: DATA 1 sets the bank number, (0 for
factory, 1 for user) and DATA 2 sets the PERFORMANCE
number.
The same -1 offset applies as in PROGRAM
CHANGE.
P, PERFORM -: DATA 1 and DATA 2 do not op-
erate with these functions.
TEMPO: Only DATA 1 works to set the required tempo.
CONTROLLER: DATA 1 sets the MIDI controller number,
DATA 2 sets the value of that controller function.