Generalmusic 271221, Owner'S Manual

Page: 1 / 224

271221
IMPORTANT
Read Before Using Keyboard!
Congratulations on your purchase of the new Equinox Synthesizer Workstation from
Generalmusic. This instrument is equipped with cutting edge Flash ROM memory, so that your
new keyboard can be permanently updated by disk with the latest operational advantages and
new features.
It is important that you follow the procedure below before using your instrument
for the first time to ensure that the instrument functions properly . Check with your authorised
Generalmusic dealer for exciting new features to load in your Flash ROM in the future.
STEP 1
With the instrument turned OFF, insert the Generalmusic Equinox
Operating System Disk included in your materials packet into the disk
drive.
After you have inserted the disk, turn the instrument ON .
STEP 2
You will see a message in the instrument display screen that says:
Loading OS-DISK clears ALL MEMORY!! <Enter to Load/Escape to
abort>
Press ENTER
and wait about 3 minutes for the new Operating System
to load. When the new system has finished loading, you will see the
following message in the instrument display screen:
Loading Successful!! <Enter to continue>
At this time, Press ENTER again and the instrument will proceed
through the normal operating display screens. You can now Turn
OFF the instrument in preparation for the final step listed below.
IMPORTANT: REMOVE THE OPERATING SYSTEM DISK BE-
FORE PROCEEDING TO THE FINAL STEP!
FINAL STEP
As you turn the instrument ON, KEEP ROTATING THE DIAL until
the following message appears in your display screen:
!!WARNING!! Dial on Power-Up Requests Memory Clear!!
<Enter to clear/Escape to abort>
Press ENTER
. You have now completed the
update process, and your Generalmusic Equinox
has been permanently upgraded.
Note: There may be a Battery Warning message when you initially turn on the instrument.
This message will not appear after the instrument has been plugged in and turned ON for a
few hours. During this time, the internal battery that holds new information in memory
will recharge. For now, just press ENTER or ESCAPE to continue on if the message appears
when you power-up the instrument.