Generalmusic 271221, Owner'S Manual

Page: 178 / 224

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12•2 User Guide
Creating a new Panel configuration
To create a new configuration, first press the USER button and
then press EDIT, (F1).
Now can choose which control you’re going to program by sim-
ply touching any one of the sliders or buttons. As soon as you
operate one of these controllers, you will see it’s name appear in
the top right corner of the screen and you’re ready to begin edit-
ing it. Begin by moving Slider 1 so we can take a look at the
slider edit menu:
MODE BUTTON, (F2)
Probably the first thing to decide is whether this slider is going to
control the Equinox’s internal sounds or whether it’s going to be
used only for sending MIDI to external instruments. The availa-
ble options are as follows:
1. INTERNAL: The slider will control the sounds of the Equi-
nox’s synth engine.
2. EXTERNAL OUT 1: The slider will send data only to MIDI
OUT 1.
3. EXTERNAL OUT 2: The slider will send data only to MIDI
OUT 2.
4. SEQUENCER: The slider will control the sounds of the
Equinox’s sequencer engine
Make a selection and then press
ENTER to return to the main
edit screen.