○
○
○
○
○
○
○
○
○
○
○
○
○
○
6 Quick Guide
Setting up and getting to know the instrument
The Equinox does not have it ‘s own built in amplification so
either headphones or an external amplifier/speaker system are
required.
For external amplification, a high quality stereo keyboard ampli-
fier system is recommended.
Connecting a set of headphones
If you prefer to play with headphones for high quality personal
monitoring, plug a standard stereo headphone set (8
Ω
) into one
of the two headphones jacks located on the left side of the instru-
ment, under the Wheels panel.
Use the Master volume slider to adjust the headphone volume.
Connecting to an amplification system
Before connecting audio cables, be sure that the power switch
on the rear panel is off and the master volume is at minimum.
Connect the power cord to the rear panel mains socket and in-
sert the other end of the power cord into a suitable grounded wall
outlet.
Connect the audio cables to the stereo audio outputs (Left, Right)
and the other ends to your amplifier system. Use audio cables
with standard 1/4” jacks. To connect to domestic stereo units,
use RCA jacks. For mono reproduction, connect to either the
Left or Right output jack. The auxiliary outputs 1 and 2 emit “dry”
signals (i.e. no effects).
Stereo
amplification
system
Summary of Contents for 271221
