○
○
○
○
○
○
○
○
○
○
○
○
○
○
9•2 User Guide
CONTROLS
The CONTROLS button is where you set up any pedals which
have been connected to the unit.
The Equinox can accommodate a maximum of three pedals and
each of the three pedal jacks on the rear panel can be set to
accommodate any type of pedal.
Place the cursor over either Pedal 1, Pedal 2 or Damper and
press the
TYPE button, (F3).
You can now tell the instrument which type of pedal has been
connected to that jack. There three options are as follows:
CONTINUOUS:
Also known as a CC Pedal, this setting
indicates that a variable volume type pedal has been con-
nected to the corresponding pedal jack.
OPEN SWITCH: This indicates that a normally open foots-
witch has been connected to the corresponding pedal jack
CLOSED SWITCH:
This indicates that a normally
closed footswitch has been connected to the corresponding
pedal jack
Press ENTER after assigning each pedal. The functions availa-
ble for each pedal can be selected by turning the dial while the
cursor is over the pedal name. You will find different options are
available depending on the type of pedal assigned.
The pedal settings you choose will remain in effect only until you
select a different
PERFORMANCE from the current one. If you
Summary of Contents for 271221
