GM9907-L5
bulk scale controller user’s manual
- 58 -
5.3.3
Single supplement
Supplement Empty is defined, Full is not defined
，
Only
I12
is used for Input value
，
Corresponding to Single supplement.This time controller will not process supplement
control.Only detect Supplement Empty before filling, when this signal is ON, starts
filling.In filling process, controller do not detect Supplement Empty signal if is ON.
Supplement Full, Empty both are not defined
，
Corresponding to no material. This time
controller do not control supply, do not detect Supplement Empty if is ON before filling
5.4
U disk update software
5.4.1
Upgrade steps
Steps as follow
：
1.
containing the upgrade kit "tpcbackup" into the controller
2.
Power up the controller, and the message "You are using the comprehensive function
package of MCGSTpc USB flash disk, click 'Yes' to enter the system setting interface
and start the comprehensive function package, click' No 'to exit" pops up;Click "Yes"
and the "User Project Update" button pops up
3.
Click "user project update" button, select GM9907-L5 engineering began to
download
4.
Download success, restart automatically
5.4.2
Background upgrade steps
Steps as follow
：
1.
Insert the
USB
flash drive into the computer and create a new " GM9907-L5 "
folder in the
USB
flash drive
2.
Save
“
GM9907-L-Upload.gm
”
file to
“
GM9907-L5
”
folder
；
3.
Plug the USB flash disk into the controller, switch to the system administrator
permissions, go to the Maintenance - Firmware Upgrade interface, long press the
blank in the lower right corner of 5S, and the "Click Update" button pops up, jump
to the upgrade interface, click "Update", click "Update" again, and the words
"Updating" appear, indicating that the controller is upgrading the background
4.
When the progress bar is finished, the upgrade will be successful after the
countdown of 10s and the login interface will be switched to
5.5
U disk upgrade boot interface
Steps as follow
：
1.
Save the image file (resolution 800*480, format.bmp) into the root directory of U
disk containing the project package (tpcbackup)
