WALRUS 5000C
P a g e
| 9
FUEL LINE CONNECTIONS
1.
Fuel Connector Clamp
2.
Fuel Pipe
3.
Rubber Fuel Connector
Figures on this page show the correct way
to connect fuel lines to prevent the build-up of
air bubbles: Ensuring they are flush and
minimizing bends.
When the fuel is being sucked from the
vehicle tank, or an independent tank, a fuel
standpipe is required. Make sure all the openings
are appropriate for the installation and a tight
seal is maintained for the base of the standpipe
(see pages 10-11).
The bottom of the suction pipe should be
about 30-40mm from the bottom of the fuel tank,
to avoid sucking impurities or sediment from the
bottom.
Summary of Contents for WALRUS 5000C
Page 13: ...WALRUS 5000C P a g e 13 WIRING DIAGRAM...
Page 19: ...WALRUS 5000C P a g e 19...
Page 20: ...WALRUS 5000C P a g e 20...
