Gema CG22-C, Operating Instructions And Spare Parts List

Page: 31 / 74

Rev. 01 08/20
OptiStar All-in-One (CG22-C) Start-up

31
No. Description Values Display
P05 CAN Baud rate
0: 20 kbit/s
1: 50 kbit/s
2: 100 kbit/s
3: 125 kbit/s
4: 250 kbit/s
5: 500 kbit/s
6: 800 kbit/s
7: 1 Mbit/s
20k
50k
100k
125k
250k
500k
800k
1M
P06 CAN Node ID 1 -127
P07
Air mode
(Air volume setting) 0: Standard (PA / GL)
1: Advanced (FL / ZL)
Standard
Advanced
P08
Remote change
(Procedure when changing
Local / Remote)
0: Gun release is reset Turn gun off
1: Gun release is not changed Keep gun state
2: Gun release always active Always enabled
P10
Log level 0, 1, 2 , 3, 4, 5
P11
BLE Devid
(Bluetooth ID no.) 0: Bluetooth deactivated
1 - 255
P12
Rmt Ctrl
(Remote control) 0: Powder /-
Cleaning activation
1 : Program change
Cleaning activation
PA / Clean
Prog / Clean
1)
is not overwritten, if a Memory Reset is performed
Default values are marked by bold print.
5. Scroll to the next or previous system parameter with the or
key
Selection is cyclical, i.e. after the last system parameter, the first
starts again and vice versa.
6. Press key to quit the system parameter mode.
– The display switches to the
START screen