Gema CG22-C, Operating Instructions And Spare Parts List

Page: 45 / 74

Rev. 01 08/20
OptiStar All-in-One (CG22-C) Operation

45
3. Switch off the gun after 60 seconds, remove the measuring bag and
weigh it
4. Annotate the powder output in g/min in the table
Calculate the powder output correction according to following formula:
C1 (%) =
smallest powder output
x 100
measured powder output
5. Annotate the calculated values ( C1 ) for each individual gun in the
table and enter the values to the control unit (therefore, repeat the
steps 2 and 3)
Example table for powder offset and powder hose
correction
Gun Powder offset correction C0
No.
Before
correction
After
correction
1 C0=1.8 Nm³/h 20 g C0=1.7 Nm³/h 12 g
2 C0=1.8 Nm³/h 10 g C0=1.8 Nm³/h 13 g
3 C0=1.8 Nm³/h 0 g C0=2.6 Nm³/h 12 g
etc.
Gun Powder hose correction C1
No.
Before
correction
After
correction
1 C1=100 % 200 g C1=100 % 200 g
2 C1=100 % 250 g C1=80% 200 g
3 C1=100 % 280 g C1=71% 200 g
etc.