background image

39

Troubleshooting

Mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

No pictures are 

displayed.

(continued)

The brightness is adjusted to an extremely low level.

Adjust BRIGHTNESS to a higher level using the menu 

function or the remote control.

The computer cannot detect the projector as a plug

and play monitor.

Make sure that the computer can detect a plug and play 

monitor using another plug and play monitor.

The BLANK screen is displayed.

Press the BLANK button on the remote control.

Video screen

display freezes.

The Still function is set to on.

Press the Still button to restore the screen to normal.

Pictures appear 

dark.

The lamp is approaching the end of its product

lifetime.

Replace the lamp.

Pictures appear

blurry.

The focus is not properly adjusted.

Adjust the focus using the focus ring.

The lens is dirty or misty.

Clean the lens referring to the section “Caring for the lens”.

NOTE

► 

Although bright spots or dark spots may appear on the screen, this 

is a unique characteristic of liquid crystal displays, and it does not constitute 

or imply a machine defect.

No remote

function

No battery

Remote signal be obstructed

Before use the remote control, 

please check battery of remote controller.

Remove obstacle between projector and remote controller

Colors are pale

Color lose.

Caused by poor VGA cable connection.

Color density and color matching are not correctly

adjusted.

Adjust the RGB setting.

21

19

19

33

17

12

13

Summary of Contents for 696N













































Reviews: