31
SECURITY menu
Item
Description
Projector network setting display which shows bits
that can be recognized by ASCII.
MASK
MAC Addr.
MAC address is the only media access control
address of the LAN control module. It will appear in
6 groups of 2 Hexadecimal digits.
1. Press Up or Down(▲ / ▼)button to select item.
Enter LAN SETTING to set up
projector network configuration.
2. Press Left or Right(◄ / ►) button to enter setting screen.
Press ◄ / ► button to enter selected item. When appears, press ▲ / ▼ to
adjust value. After finishing value adjustment, press MENU
to exit this item
and go back to previous level and continue adjusting value of the other items.
3. Press ▲ / ▼ button to select <EXECUTE>. Then press ► button
to save
setting.
PROJECTOR
NAME
Default is
blank
DHCP
OFF / ON
When setting ON, projector’s IP address will be
assigned by DHCP server automatically. When
setting OFF, you can use remote control to do
setting manually.
IP
0.0.0.0 ~
255.255.255.
255
0.0.0.0 ~
255.255.255.
255
Enter MASK address manually. Press "ENTER" to
do digit setting. When appears, press ▲ / ▼to adjust
value. When finishing value adjustment, press MENU
to exit. (Default value is 255.255.0.0.)
GATEWAY
Enter GATEWAY address manually. Press "ENTER"
to do digit setting. When appears, press ▲ / ▼to
adjust value. When finishing value adjustment, press
MENU to exit. (Default value is 10.0.0.254.)
0.0.0.0 ~
255.255.255.
255
CURRENT TIME
EXECUTE
Show current time of projector setting.
Press this button to save LAN setting.
Key in IP address manually. Press "ENTER" to do
digit setting. When appears, press ▲ / ▼to adjust
value. When finishing value adjustment, press
MENU to exit. (Default value is 10.0.50.100.)
