33
Maintenance
Lamp
Replacing the lamp
In case of replacement by yourself,
A lamp has finite product life. Reserving is recommended.
1.
Turn the projector off, and unplug the power cord. Allow the projector to cool for
at least 45 minutes.
2.
If the projector is mounted on a ceiling, contact your local dealer to replace the lamp.
3.
Remove the Lamp door.(marked by arrow)
4.
Loosen 2 screws of the lamp holder.
Grasp the handle on the top of the lamp
and pull the lamp straight up out of the projector.
5.
Insert the new lamp, and retighten firmly the
2 screws of the lamp holder and lock the
Lamp Door.(marked by arrow)
CAUTION
►Do not touch any inside of the projecto
r, while the lamp is taken
out.
WARNING
►Do not touch the bulb. Touching the bulb will greatly decrease
the life of the lamp and could cause the bulb to explode.
NOTE
►
Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
Lamp Door
5
screws
The Handle
4
Lamp Door
3
