9
Setting up
Connecting your devices(Continue)
WARNING
►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION
►
T
urn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or otherwise designed cables. Ask your dealer
about non-accessory cables which may have other length or equipped with
a core. For cables with a core only at one end, connect the end with the core
to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the
projector.
NOTE
►
Be sure to read the manuals for devices before connecting them to the
projector, and make sure that all the devices are suitable to be connected with this
product. Before connecting to a PC, check the signal level, the signal timing, and the
resolution.
- Some signal may need an adapter to input this projector.
- Some PCs have multiple screen display modes that may include some signals which
are not supported by this projector.
-The best display performance will be achieved if the resolutions of the input signal
and the projector panel are identical.
►
While connecting, make sure that the shape of the cable's connector fits the port to
connect with. And be sure to tighten the screws on connectors with screws.
►
When connecting a laptop PC to the projector, be sure to activate the PC
’
s external
monitor(RGB) output. (Set the laptop PC to CR
T
display or to simultaneous LCD and
CR
T
display.) For details on how this is done, please refer to the instruction manual of
the corresponding laptop PC.
►
In some cases, this projector may not display a proper picture or display any picture
on screen. For example, automatic adjustment may not function correctly with some
input signals. An input signal of composite sync may confuse this projector, so the
projector may not display a proper picture.
