![background image](http://html1.mh-extra.com/html/geha/696n/696n_user-manual_2205832007.webp)
7
Setting up
WARNING
• Place the projector in a stable horizontal position.
If the projector falls or is knocked over it could cause injury and/or damage
to the projector
. Using a damaged projector could then result in fire and/or
electric shock.
(1) Do not place the projector on an unstable, slanted or vibrational surface
such as a wobbly or inclined stand.
(2) Do not place the projector on its side, front or rear position.
(3) Consult with your dealer before a special installation such as suspending
from a ceiling.
• Place the projector in a cool place, and ensure that there is sufficient
ventilation.
The high temperature of the projector could cause fire, burns and
/or malfunction of the projector.
(1) Do not stop-up, block or otherwise cover the projector's vents.Keep a
space of 20 cm or more between the sides of the projector and other
objects such as walls.
(2) Do not place the projector on metallic thing or anything weak in heat.
(3) Do not place the projector on carpet, cushions or bedding.
(4) Do not place the projector in direct sunlight or near hot objects such as
heaters.
(5) Do not place anything near the projector lens or vents, or on top of the
projector.
(6) Do not place anything that may be sucked into or stick to the vents on
the left of the projector. This projector has some intake vents also on the
left.
• Avoid placing the projector in smoky, humid or dusty place.
• Do not place the projector anyplace where it may get wet. Getting the
projector wet or inserting liquid into the projector could cause fire, electric
shock and/or malfunction of the projector.
(1) Do not place the projector in a bathroom or the outdoors.
(2) Do not place anything containing liquid near the projector.
CAUTION
Placing the projector in such places could cause fire, electric shock and/or
malfunction of the projector.
(1) Do not place the projector near humidifiers, smoking spaces or a kitchen.
(2) Position the projector to prevent light from directly hitting the projector's
remote sensor.