29
SECURITY menu
In the SECURITY category, items
shown in the table below can be
performed.
Select an item using the ▲/▼ cursor
buttons, and press the► cursor
button or ENTER button to execute
the item. Then perform it according
to the following table.
Item
Description
PIN LOCK
PROTECTION
Modify PIN
Off
On 1
On 2
execute
Off
：
Turn off PIN lock protection.
On 1
：
PIN code is needed only first time after AC
switched off.
On 2
：
PIN code is needed every time the projector
been turned on.
CAUTION :
►
Once the PIN code had been set, the projector can’t be
used unless you entered the correct PIN code.
►
To avoid unnecessary trouble, if you activate the [ PIN
Lock Protection ] , it is highly recommended that you write
down the PIN code and store it in a safe place.
1.
Press the MENU button on the projector or
remote control.
2.
Use the ► cursor button to select the
Modify PIN item of the SECURITY category.
3.
Press
►
cursor button to change PIN lock protection
mode.
4.
Please Enter the original PIN code.
(1) If the PIN is correct, system will allow you to change
a new PIN code.
(2) If the PIN is incorrect, a “Code Error” message will
appear.
5.
Please Enter a new PIN code. And then enter again to
confirm.
NOTES ►
To change the PIN lock protection state,
you must enter the PIN code first.
►
Please enter: 0000 for first-time use.(default)
►
Write your selected password down here in this
manual so that it will help you avoid the trouble
of forgetting the password,see the selection
“Appendix”. (
SEE P42
)
(continued on next page)
