Gefen 4x1 Multiview Seamless Switcher, User Manual

Page: 50 / 92

page | 40
Web Interface
Setup ► Video
This tab is the main configuration page for the output and windows. The output resolution
modes are Native and Custom .
Native
The Native mode will attempt to set the output of the unit based on the native resolution
detected in the EDID of the connected display.
Custom
The Custom mode can be set by selecting any of the Output Resolution buttons displayed.
Select Window & Picture Settings
To configure a
Window
, select a window from the A , B , C and D options displayed. If
desired, use the option sliders to set the Brightness , Contrast , Saturation and Hue . You
can also set them manually by typing in numeric values (0 – 100)
.
Source Label
*
The Source Label displays the named source label that is set in the GUI for that window.
Window Label
*
Window Label displays the named window label that is set in the GUI for that window.
Border
*
The Border option displays a color border around the window. The border color is non-
configurable and matches the window color displayed in the Routing, Window Setup, and
Names tabs.
Border Tally
*
Border Tally will will blink the border On and Off if set to Yes . If the Border option is NOT set
to Yes . Border Tally option will be grayed out.
* (
Yes
=Enable;
No
=Disabled)