Gefen 4x1 Multiview Seamless Switcher, User Manual

Page: 13 / 92

page | 3
Panel Layout
ID Name Description
1 HDMI In (1 - 4)
Connect up to four Full High Definition
sources to these inputs using HDMI cables.
2 IR In/Ext
If IR control is required and the unit is not
installed in line of sight, connect the included
IR extender module EXT-RMT-EXTIRN or
electrical IR output from an automation control
device to the IR In/Ext port on the back panel
of the unit.
3 IP Control
Connect a CAT-5 (or better) cable between
this jack and a LAN to use IP control. Refer
to RS-232 and IP Configuration , pg. 52, for
more information on setting up IP control.
4 L/R Audio Out
If using an outboard amplification system,
connect a pair of RCA patch cables from the
Audio Out connectors on the unit to your
amplifier.
5 RS-232
To control the unit via RS-232, connect the
included DB-9 cable from an automation
control device to the unit. See RS-232 and IP
Configuration , pg. 52, for more information
on setting up RS-232 control.
6 HDMI Out Connect to an HD or 4K display.
7 Syner-G (mini USB) Connection to Syner-G for firmware upgrade
8 12V DC
Connect the included 12V DC power supply
from this power receptacle to an available AC
electrical outlet.
1 3
7 8 4 6 5
2
Back