Gefen 4x1 Multiview Seamless Switcher User Manual Download Page 34

Page: 34 / 92

page | 24

Menu System

Using the IR Remote Control

The IR remote control has buttons which represent the controls on the front panel.

Press the ▲ and ▼ buttons to navigate and change settings. Press the

button to

choose a setting or to apply the change. You can also press the ◄ or ► buttons to go back

or navigate forward into the menus.

Press the ▲ and

▼ buttons to move

up and down within

the menu system or

change settings

Press OK to choose a

setting or to apply the

selected setting

Press the ◄ or ►

buttons to go Back or

to Navigate forward

into the menus

Summary of Contents for 4x1 Multiview Seamless Switcher





























































































Search results

Summary of Contents for 4x1 Multiview Seamless Switcher

Reviews:

Related manuals for 4x1 Multiview Seamless Switcher

Brands by name

Popular brands

Gefen 4x1 Multiview Seamless Switcher, User Manual

Search results

Summary of Contents for 4x1 Multiview Seamless Switcher

Reviews:

Related manuals for 4x1 Multiview Seamless Switcher

Brands by name

Popular brands