manualshive.com logo in svg

Gefen 4x1 Multiview Seamless Switcher, User Manual

Share
Download
Gefen 4x1 Multiview Seamless Switcher User Manual Download Page 33

page | 23

Menu System

Using the Front Panel Controls

Use the ◄, ►, ▲, and ▼ buttons on the front panel to move around within the menu 

system. Press the ▲ and ▼ buttons to move up and down. Press the 

Select

 button to 

make the desired selection. The current selection will be highlighted in orange. Press the 

▲ and ▼ buttons to change settings. Press the 

Select

 button to apply the change. You can 

also press the ◄ or ► buttons to go back or navigate forward into the menus.

Press to select the 

highlighted menu item 

or apply the change.

Press to go back to the 

previous menu item 

or cancel adjusting a 

parameter.

Press the ▲ and ▼ buttons to 

move the selection or change 

settings within the menu system

You can press the ◄ or ► 

buttons to go back or navigate 

forward into the menus.

Summary of Contents for 4x1 Multiview Seamless Switcher





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands