Instrument and Controls
32
Wipers and Washers
Wiper Control Combination
Switch (Sedan)
The front wiper of this vehicle is controlled
by a wiper combination switch located on
the right side of the steering column.
1.
Wiper control handle
2.
Intermittent speed adjustment knob
If the dust or sand is affixed to the
windshield, clear them immediately
before using the wiper. Otherwise, it may
bring scratches to the glass and affect the
life of the wiper blade.
Operation of Wiper Control Combi-
nation Switch
Inching Wiping of Front Wiper
Pull handle 1 toward A and release the han-
dle (even if the handle is in the MIST posi-
tion, and then release it), handle 1 will
return to OFF position automatically and the
front wiper will perform inching wiping oper-
ation.
Front Wiper OFF
The front wiper turns off when handle 1 is in
OFF position.
Intermittent Wiping of Front Wiper
Pull handle (1) toward B to
position, and
the front wiper will wipe intermittently. At
this time, turn the intermittent speed adjust-
ment knob (2) to adjust the wiping interval.
Low-speed Wiping of Front Wiper
Pull handle (2) toward B to LO position, and
the front wiper will wipe at low speed.
High-speed Wiping of Front Wiper
Pull handle (2) toward B to HI position, and
the front wiper will wipe at high speed.
Washing of Windshield
Pull handle (1) toward C, and the wiper will
wipe when the windshield squirts water.
After releasing handle (1), the washer will
stop squirting, and the wiper will return to its
original position.
Do not use the wiper while the wind-
shield is dry. Otherwise, it may bring
scratches to the glass and affect the life of
the wiper blade.
