manualshive.com logo in svg

Geely Emgrand 2015, Manual

The Geely Emgrand 2015 is a stylish and efficient vehicle that offers exceptional performance on the road. To make the most of your driving experience, download the free user manual from our website. This comprehensive manual provides detailed instructions and insights to ensure you maximize the potential of your Geely Emgrand 2015.

Share
Download
background image

Starting and Driving

118

2.

If the engine can't be started within      
5~10 seconds, especially in cold 

 

 

 

weather (under -18 ° C), it may be the        
result of too much gasoline poured into      
the engine. Try to fully press the accel-       
erator pedal and hold it. At the same       
time, press the ignition switch button for      
1 to 2 seconds. The start time interval       
should be at least 15 seconds to cool       
down  the  starter.  After  starting  the     
engine, please release the accelerator    
pedal. If the vehicle is started and then       
turned off at once, please implement the      
same operations. In this way, the extra      
gasoline  in  the  engine  can  be  cleaned      
up. Don't increase the engine speed     
immediately after starting the engine.    
Gradually operate the engine and the     
transmission so that the engine oil can      
be preheated and lubricate all working     
parts.

Backup Starting Procedure of Vehi-    
cle

When the vehicle is in a strong signal inter-        
ference region, and the power of the key       
remote control battery is insufficient, or the      
keyless start function fails, if you try to start        
the vehicle and press the ignition switch      
button, the instrument cluster may prompt     
"Not Detect Smart Key", by this time you       
can't start the vehicle through press-button     
type start procedure.
Please follow the steps below to start the       
vehicle:

1.

Keep  the  remote  control  as  close  as      
possible to the ignition switch button.

2.

press the clutch pedal (MT) or the brake       
pedal (CVT).

3.

Press the ignition switch button to start      
the engine.

Scope of application of the standby     
start procedure:

•

The key remote control batteries use up      
and are not replaced in time. 

•

When the vehicle is in a strong signal       
interference,  you  can  get  the  vehicle  off      
this zone through the use of standby      
start procedure so as to restore the nor-       
mal function of the keyless start proce-      
dure.

After replacing the batteries and getting the      
vehicle off the interference zone, if the key-       
less start procedure still cannot be in nor-       
mal use, please go to the Geely Service       
Station for maintenance.

If Engine Fails to Start

Before inspection, be sure to start the vehi-       
cle in accordance with the correct start pro-       
cedure in the "Starting Engine"section, and     
confirm whether there is enough fuel.
Even if your vehicle is equipped with the       
electronic anti-theft system, you also need     
to check whether other keys can also start       
the engine. If other keys can start the       
engine, your keys may go wrong. Hand      
over your keys to the Geely Service Station       
for maintenance. If all your keys fail to start        
the engine, the system may have a mal-       
function. Please contact the Geely Service     
Station for maintenance.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews:

No comments

Related manuals for Emgrand 2015

Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Oldsmobile 1998 Aurora Owner'S Manual preview
1998 Aurora
Brand: Oldsmobile Pages: 380
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Bestop 51252 Installation Instructions preview
51252
Brand: Bestop Pages: 4
T.J.M. T13 Outback Frontal Protection System Fitting Instructions Manual preview
T13 Outback Frontal Protection System
Brand: T.J.M. Pages: 18
Audi PXDXVW3 Quick Start Manual preview
PXDXVW3
Brand: Audi Pages: 4
Yakima LockNLoad LightenUp Manual preview
LockNLoad LightenUp
Brand: Yakima Pages: 13
Volkswagen Passat 2011 Maintenance Manual preview
Passat 2011
Brand: Volkswagen Pages: 188
walser Crystalline Mounting Instruction preview
Crystalline
Brand: walser Pages: 8
Honda HR-V 2019 Owner'S Manual preview
HR-V 2019
Brand: Honda Pages: 76
FACTORY UTV Dual Clamp Spare Tire Mount Installation Manual preview
Dual Clamp Spare Tire Mount
Brand: FACTORY UTV Pages: 2
BENDIX C-5 CUT OUT COCK Manual preview
C-5 CUT OUT COCK
Brand: BENDIX Pages: 2
Federal Signal Corporation LEDTCL97 Installation And Service Instructions Manual preview
LEDTCL97
Brand: Federal Signal Corporation Pages: 12

Brands by name

Popular brands

Load more brands