manualshive.com logo in svg

Geely Emgrand 2015, Manual

The Geely Emgrand 2015 is a stylish and efficient vehicle that offers exceptional performance on the road. To make the most of your driving experience, download the free user manual from our website. This comprehensive manual provides detailed instructions and insights to ensure you maximize the potential of your Geely Emgrand 2015.

Share
Download
background image

1

2

3

4

5

6

7

8

Instrument and Controls  

27

Driver Seat Belt Unfastening Indi-    
cator - Red 

If the driver seat belt is not fastened       
when the ignition switch is turned to      

ON position, this indicator will remain on      
until it is fastened by the driver.

Passenger Seat Belt Unfastening   
Indicator - Red

This indicator is located on the center      
console. If the front passenger does     

not fasten the seat belt, the indicator will be        
illuminated.

Tire Pressure Monitor System Mal-    
function Indicator - Yellow

When the ignition switch is turned to      
IG ON position, TPMS will perform a      

self-check. This indicator will illuminate tem-     
porarily and then go off after 3 seconds. If        
serious problems are detected, TPMS 

 

 

 

receiver will illuminate the TPMS indicator     
constantly to alert the driver.

Tire Pressure Abnormality Indicator   
- Yellow

When the ignition switch is turned to      
IG ON position, this indicator will illu-      

minate temporarily and then go off after 3       
seconds. It indicates whether the tire pres-      
sure is within the proper range. If the indica-        
tor remains on, it indicates that one or more        
tires are under-inflated or over-inflated.

ABS Malfunction Indicator - Yellow

When the ignition switch is    
turned to ON position, the    

ABS and EBD indicators will illuminate. If      
the anti-lock brake system and brake assist      
system function normally, this indicator will     
go off after a few seconds. If these systems        
malfunction when the engine is started or      
the vehicle is driven, both ABS and EBD       
indicators will illuminate. Have your vehicle     
repaired by the Geely Service Station 

 

 

 

 

immediately.
If these indicators illuminate and then go off       
while driving, and do not illuminate again, it       
can be considered as a normal phenome-      
non. When ABS and EBD indicators illumi-      
nate (brake malfunction indicator does not     
illuminate), the function of anti-lock brake     
system will be inoperative, but the conven-      
tional brake function can still be maintained.      
Therefore, during sudden braking or brak-     
ing on a slippery surface, slipping may      
occur due to the locked wheels.

If ABS and brake malfunction indica-     
tors remain on, immediately stop the     

vehicle in a safe place and contact your       
Geely Service Station. Braking under this     
condition, the ABS may be inoperative and      
the vehicle may become extremely unstable     
during braking.

Electronic Stability Control System   
(ESC) Malfunction Indicator – Yel-    
low

If the indicator remains on, there is a       
malfunction in ESC. If the indicator     

flashes, it indicates that ESC is being      
adjusted.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews:

No comments

Related manuals for Emgrand 2015

ULTIMATE SPEED CARBON Assembly And Safety Advice preview
CARBON
Brand: ULTIMATE SPEED Pages: 19
iDataLink ADS-ALCA Install Manuals preview
ADS-ALCA
Brand: iDataLink Pages: 30
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Haibang HA998 Series Installation Instructions Manual preview
HA998 Series
Brand: Haibang Pages: 6
SnapPad EQ Round Installation Instructions preview
EQ Round
Brand: SnapPad Pages: 5
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
Alpitronic Hypercharger HYC 075 Operation Instructions And Installation Manual preview
Hypercharger HYC 075
Brand: Alpitronic Pages: 64
Chevrolet Malibu 2014 Owner'S Manual preview
Malibu 2014
Brand: Chevrolet Pages: 428
cam PFF Series Operating Manual preview
PFF Series
Brand: cam Pages: 28
Havis C-DMM-3005 Installation Instructions preview
C-DMM-3005
Brand: Havis Pages: 5
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Brand: Quadratec Pages: 14
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
POOL-LINE 110050 Assembly Instructions preview
110050
Brand: POOL-LINE Pages: 2
BMW M3 SEDAN Owner'S Manual preview
M3 SEDAN
Brand: BMW Pages: 392
Curt Manufacturing 13434 Installation Instructions preview
13434
Brand: Curt Manufacturing Pages: 4
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Cadillac Escalade 2004 Escalade ESV Owner'S Manual preview
Escalade 2004 Escalade ESV
Brand: Cadillac Pages: 472

Brands by name

Popular brands

Load more brands