background image

1

2

3

4

5

6

7

8

Service and Maintenance  

193

Cleaning and Vehicle Mainte-   
nance

Cleaning of Interior

If the interior is often cleaned, it will stay in         
good conditions. Dust and dirt may accu-      
mulate on the vehicle interior, and cause      
damages to the surfaces of floor carpets,      
fabrics, leathers and plastic products. The     
stains should be removed immediately, as     
extremely high temperature may cause    
them to solidify quickly. If the color of the        
vehicle interior is very light, it needs to be        
cleaned more frequently. The newspaper    
and clothing which are easy to fade and       
stain the furniture and fabric may also stain       
your vehicle interior. Flick the dust from the       
small buttons and knobs with a small soft       
brush. When cleaning the vehicle interior,     
use only special cleaners to clean the sur-       
face of the vehicle interior. Failure to do so        
may cause permanent damage to the vehi-      
cle. To prevent excessive spraying amount,     
spray the cleaner directly to a clean rag. If        
the  cleaner  is  sprayed  on  the  surfaces  of       
other objects in the vehicle accidentally,     
wipe it off immediately.

When cleaning the glass surface on     
the vehicle, using abrasive cleaner    

may scratch the glass and/or cause dam-      
ages to rear window defogger. Therefore,     
use only a soft cloth and glass cleaner 

  

 

  

 

when cleaning the glass on the vehicle.
The cleaner contains solvent that may con-      
dense on the vehicle interior. Read and fol-       
low all safety instructions on the label      
before using the cleaner. When cleaning     
the vehicle interior, open the doors and win-       
dows to secure good ventilation.

Do not use the following cleaners or meth-       
ods to clean the interior:

Do not use a razor blade or other sharp        
objects to remove the dirt on the interior       
surface.

Never use a hard brush. It may cause       
damage to the interior surface of the      
vehicle.

Never apply excessive force or force-     
fully wipe the surface with a cleaning      
rag.

It will not enhance the decontamination     
effect. On the contrary, this may dam-      
age the interior.

Use only a mild and neutral soap. Avoid       
using a strong detergent or degreasing     
soap.  Excessive  use  of  the  soap  may      
leave traces and adsorb the dirt.

Do not wet the interior during cleaning.

Using organic solvents such as naphtha or      
alcohol may damage the vehicle interior.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews: