manualshive.com logo in svg

Geely Emgrand 2015, Manual

The Geely Emgrand 2015 is a stylish and efficient vehicle that offers exceptional performance on the road. To make the most of your driving experience, download the free user manual from our website. This comprehensive manual provides detailed instructions and insights to ensure you maximize the potential of your Geely Emgrand 2015.

Share
Download
background image

186

Service and Maintenance

4.

Remove the windshield wiper blade.    
Without the windshield wiper blade    
installed, if you allow the windshield     
wiper arm to come into contact with the       
windshield, the windshield may be dam-     
aged.  Any  damages  caused  by  the     
above reason are not covered under     
warranty. Do not allow the wiper arm to       
come into contact with the windshield.

5.

To install the wiper blade, perform step      
1 to 4 with the directions reversed.

Replacement of Rear Wind-   
shield Wiper Blade (Hatchback)

Check if the windshield wiper blade is worn       
or broken. To replace the windshield wiper      
blade:

1.

Pull the windshield wiper blade from the      
windshield.

2.

Turn the windshield wiper blade in the      
direction indicated by the arrow and 

 

 

 

 

remove it directly.

3.

To install the wiper blade, perform step      
1 to 2 with the directions reversed.

Tire

Your  new  vehicle  is  equipped  with  high      
quality tires, which are made by an industry       
leading tire manufacturer. If you have any      
question about the maintenance and repair     
station of the tires, refer to "Warranty and       
Maintenance Manual" of this vehicle for     
details. Consult your tire manufacturer for     
further information.

It is very dangerous if the tires are       
incorrectly used or lack maintenance.

Overload of the tires may cause the tires to        
overheat  due  to  excessive  deflection.  It  will      
cause  air  leakage  and  lead  to  a  serious       
accident.
Under-inflated tires are as dangerous as     
the overloaded tires. An accident may be      
caused, resulting in serious injuries.
Make sure to check the tires frequently in       
order to maintain the recommended pres-     
sure values.
The tire pressures should be checked when      
the tires are cold. Refer to "Tire Inflation       
Pressure (Cold)" in Section 8 "Technical     
Data".
Over-inflated  tires  are  more  likely  to  be      
scratched, punctured, or exploded in case     
of a sudden impact, such as hitting a cavity.        
Therefore, please maintain the recom- 

 

 

 

mended tire pressure values.
Worn-out tires may cause accidents. If the      
treads of the tires are badly worn or the tires         
are damaged, replace them as soon as      
possible.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews:

No comments

Related manuals for Emgrand 2015

walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
Honda 08A06-361-210 Installation Instructions preview
08A06-361-210
Brand: Honda Pages: 4
Pro-gard SAFESTOP SS0005 Installation Manual preview
SAFESTOP SS0005
Brand: Pro-gard Pages: 4
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
Volvo 2006 XC70 Owner'S Manual preview
2006 XC70
Brand: Volvo Pages: 211
CrimeStopper CA-504.BRKT Install Manual preview
CA-504.BRKT
Brand: CrimeStopper Pages: 1
SilverLeaf Electronics VMS 645 CL Owner'S Manual preview
VMS 645 CL
Brand: SilverLeaf Electronics Pages: 16
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Smappee EVB-1332-BL-E Installation Manual preview
EVB-1332-BL-E
Brand: Smappee Pages: 28
K&N Engineering Filtercharger 57-9004 Installation Manual preview
Filtercharger 57-9004
Brand: K&N Engineering Pages: 4
Honda Element 2004 Owner'S Manual preview
Element 2004
Brand: Honda Pages: 219
Arctic Cat 2010 ATV 150 Service Manual preview
2010 ATV 150
Brand: Arctic Cat Pages: 101
Curt Manufacturing 12070 Installation Instructions preview
12070
Brand: Curt Manufacturing Pages: 5
PIE FRDN/PC-POD2 Application And Installation Instructions preview
FRDN/PC-POD2
Brand: PIE Pages: 2
Racepak 250-DS-123 Quick Start Manual preview
250-DS-123
Brand: Racepak Pages: 17
Federal Signal Corporation DFC-WC-DUR21 Manual preview
DFC-WC-DUR21
Brand: Federal Signal Corporation Pages: 4

Brands by name

Popular brands

Load more brands